Accredited mechanical testing - Contact us if you need help

Contact
  1. Danish Technological Institute
  2. Services
  3. Materials and surface technology
  4. Testing and examination of  materials
  5. Accredited mechanical testing
Otto Lundgren Hejgaard

Your Contact

Contact me

Indtast venligst et validt navn
Or your phone number
?
Thank you for your message
Vi beklager

På grund af en teknisk fejl kan din henvendelse desværre ikke modtages i øjeblikket. Du er velkommen til at skrive en mail til Send e-mail eller ringe til +45 72 20 12 51.

rød belysning på trækprøve

Accredited mechanical testing - Contact us if you need help

The Danish Technological Institute is an accredited test laboratory under DANAK accreditation no. 04-0053 to conduct tests within materials testing:
Our services within metal analysis and testing

  • Arbeitsblatt GW 541, October 2004, Annex A Testing of pipes made of stainless steel for corrosion-promoting residues
  • AS 2345 Dezincification resistance of copper alloys
  • ASTM E1086 Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
  • ASTM E415 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
  • DS EN ISO 148-1 Metallic materials – Charpy pendulum impact test – Part 1: Test method
  • DS/EN 10080 Steel for the reinforcement of concrete – Weldable reinforcing steel – General
  • DS/EN 15079 Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES)
  • DS/EN ISO 15614-1 (DT part) Welding procedure test (DT part)
  • DS/EN ISO 15614-1 (DT part) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (DT part)
  • DS/EN ISO 15630-1 Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Bars and wires
  • DS/EN ISO 15630-2 Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric
  • DS/EN ISO 15630-3 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel
  • DS/EN ISO 17639 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
  • DS/EN ISO 3651-2 Determination of resistance to intergranular corrosion of stainless steels. Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion testing in media containing sulfuric acid
  • DS/EN ISO 5173 Destructive tests on welds in metallic materials - Bend tests
  • DS/EN ISO 6506-1 Metallic materials - Brinell hardness test - Part 1: Test method
  • DS/EN ISO 6507-1 Metallic materials – Vickers hardness test – Part 1: Test method (ISO 6507-1:2023)
  • DS/EN ISO 6508-1 Metallic materials - Rockwell hardness test - Part 1: Test method
  • DS/EN ISO 6509 Corrosion of metals and alloys - Determination of dezincification resistance of copper-zinc alloys
  • DS/EN ISO 8491 Metallic materials – Tubes – Bend test
  • DS/EN ISO 8493 Metallic materials – Tubes – Ring expanding test
  • DS/ISO 6892-1 Metallic materials – Tensile testing – Part 1: Method of test at room temperature
  • EN 1433 Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
  • ISO 6957 Copper alloys – Ammonia test for stress corrosion resistance

Registration of new areas for our accreditation or re-establishing previous areas can occur upon requests from customer.