Danish Technological Institute participates in Danish initiative regarding storage of CO2

Sune Dowler Nygaard

Your Contact

Contact me

Indtast venligst et validt navn
Or your phone number
Thank you for your message
Vi beklager

På grund af en teknisk fejl kan din henvendelse desværre ikke modtages i øjeblikket. Du er velkommen til at skrive en mail til Send e-mail eller ringe til +45 72 20 24 20.

Emission fra skorsten

Danish Technological Institute participates in Danish initiative regarding storage of CO2

New partnership will develop and ensure mature technology and infrastructure that can capture, store, and utilize CO2. 20 projects will be launched, and the first solutions will appear in 2025.

Carbon capture, utilization, and storage (also called CCUS) will be one the solutions towards a 70% CO2 reduction in Denmark by 2030. The effort to reach that goal has been intensified as Innovation Fund Denmark has invested 201 million DKK in a new partnership called INNO-CCUS.

INNO-CCUS is one of four partnerships (so-called Innomissions) that will contribute to reduced greenhouse gas emissions in Denmark and to increased competitiveness of Danish business and industry. Each Innomission will work together with a wide range of companies and knowledge institutes to forward the joint agenda.

Towards a fossil-free future

'CO2 capture and utilization are imperative to solving the paramount climate crisis we are experiencing due to decades of persistent exploitation of fossil resources. It is difficult to exaggerate the importance of the Innomission that works towards a fossil-free future, and each and every hour the Innomission becomes more and more important. At Danish Technological Institute, we are proud to be part of the partnership that comprises 56 proficient companies, universities, and GTS Institutes', says Mr. Sune Dowler Nygaard, Executive Vice President at Danish Technological Institute.

201 million DKK will be invested in INNO-CCUS, and in the next few years, the partnership will develop and ensure mature technology and infrastructure that can capture, store, and utilize CO2. The partnership will focus on short-term and long-term solutions, and already in 2025, the first tangible results contributing to the reduction of CO2 are expected to see the light of day.

20 projects will be launched

Currently, 20 projects are ready to be launched in 5 areas that individually and in co-operation will ensure solutions that can reduce the discharge of CO2.

Danish Technological Institute is participating in three projects that will be implemented together with several knowledge partners and industrial partners. They will focus on the monitoring of CO2 storages, CO2 from biomass burning, and discharge from the production of cement.

CO2 storages will be monitored to avoid leaks

As part of the future scheme to store carbon in Denmark, ongoing monitoring will prevent CO2 leakage and ensure the integrity and safety of the oil reservoirs. Danish Technological Institute will participate in the development of advanced monitoring technologies based on on-site sensors and satellite measurements to ensure against leakage from the infrastructure that will handle and store the captured CO2.

Utilisation of CO2 from biomass burning

Most CHP plants in Denmark have replaced coal with biomass - mainly straw and wood pellets. Viewed individually, the CO2 discharge from biomass burning emits large amounts of CO2 - often polluted with other gasses and particles. That challenges the purity of the CO2 to be captured and subsequently used in the carbon-based production of the future. Therefore, Danish Technological Institute is developing a pilot test rig that under lifelike operating conditions will test technologies that can utilize CO2 from biomass-fired plants.

Towards the production of CO2 neutral cement

The cement industry discharges a considerable amount of CO2 that currently totals eight percent of the global load of CO2. In the project called NewCement, a new process will be developed; heat will be used to produce concrete by burning in pure oxygen instead of air – also called oxyfuel. A flue gas mainly consisting of CO2 and water is obtained – and it is not necessary to “purify” the CO2 out of the flue gas. That makes the carbon capture less expensive. It will be a trend-setting project, and it will present the first large-scale plant and expedite the green transition of the concrete industry.

Large partnerships pave the way for green transition

Danish Technological Institute already participates in several partnerships on CCUS, including Project Greensand that is developing an infrastructure for CO2 storage in closed oil reservoirs in the North Sea.

'Funding suppliers as well as companies are investing more and more ambitiously in green transition, including CCUS; and funding takes place in partnerships that are becoming larger and more wide-ranging. That is an unconditionally good and necessary development as the broad partnerships permit interaction between requirements and solutions in the entire supply chain. That is exactly how a strong technological infrastructure works - not only financially and technologically - but also on a large scale. Therefore, INNO-CCUS is an important step towards green transition', says Sune Dowler Nygaard, Executive Vice President at Danish Technological Institute.


  • INNO-CCUS is one of four partnerships – called Innomissions – that will accelerate the green transition in Denmark and the competitiveness of Danish business and industry.
  • INNO-CCUS involves capture, storage, and utilization of CO2. The three other Innomissions deal with green fuels, agriculture and food production, plastics, and textiles.
  • Innovation Fund Denmark supports INNO-CCUS with 201 million DKK and focus is on short-term (2025), medium-term (2030), and long-term (2050) projects.
  • The following players are participating in INNO-CCUS: Technical University of Denmark (DTU),  Aalborg Portland A/S, Pentair - UNION ENGINEERING A/S, I/S Amager Resource Centre, Ørsted A/S, Aalborg University, FORCE Technology, Danish Technological Institute, FLSmidth A/S, Faxe Kalk A/S, EuroWind Energy A/S, COWI A/S, Port of Aalborg A/S, The University of Southern Denmark (SDU), DHI GRAS A/S, DHI A/S , University of Copenhagen (UCPH), Roskilde University (RUC), GEUS, Stiesdal SkyClean A/S, Aquagreen ApS, MASH Makes ApS, SEGES Innovation P/S, Aarhus University (AU), HedeDanmark A/S, MUSHOLM A/S, GUBRA ApS, The Danish Nature Agency, The Danish Environmental Protection Agency, Municipality of Samsø, Foresting Tomorrow ApS, KW-PLAN ApS, NaturIt ApS, The Danish Agency for Data Supply and Infrastructure, Totalenergies Upstream Danmark A/S, NORECO OIL DENMARK A/S, Stanford University, Gas Storage Denmark A/S, Explicit ApS, Danish Gas Technology Centre a/s, Technion - Israel Institute of Technology, WELLTEC A/S, RAMBØLL DANMARK A/S, DUC – Nordsøenheden, the ALEXANDRA INSTITUTE A/S, VERDO PRODUCTION A/S, Hafnium Labs ApS, CO2Techn ApS, AMMONGAS A/S, NATURE ENERGY BIOGAS A/S.

Further information

Press contact:

René Wad Andersen, Danish Technological Institute, Communications consultant, phone: +45 72 20 14 74, mail: rea@dti.dk

Professional contact:

Sune Dowler Nygaard, Danish Technological Institute, Executive Vice President, phone: +45 72 20 24 20,
mail: snd@dti.dk