Development process with 3D printing gave Rotapure a new design

Sigurd Vigen Pedersen

Your Contact

Contact me

Indtast venligst et validt navn
Or your phone number
?
Thank you for your message
Vi beklager

På grund af en teknisk fejl kan din henvendelse desværre ikke modtages i øjeblikket. Du er velkommen til at skrive en mail til Send e-mail eller ringe til +45 72 20 15 11.

Close-up af hånd med reagensglas prøver

Development process with 3D printing gave Rotapure a new design

In a MADE Demonstration project together with the Danish Technological Institute, Rotapure has tested 3D printing, and the technology has now given the company a completely new design for their laboratory equipment.

- The things we thought were very complicated and cumbersome to do in terms of meeting customer needs, we have found are much easier than we first expected, says Peter Munkholm Nielsen, co-founder and CSO of Rotapure after the company has tested 3D printing for the manufacture of their products.

The things we thought were very complicated and cumbersome to do in terms of meeting customer needs, we have found are much easier than we first expected

- Peter Munkholm Nielsen, Rotapure

Rotapure produces laboratory equipment and has participated in a MADE Demonstration project to help test whether 3D printing was the solution to accommodate the needs that Rotapure meet from e.g. clients.

- Sometimes there are questions like, “what if it could also do this”, or “can’t we change this a bit,” says Peter Munkholm Nielsen.

In the demonstration project, Rotapure received help from the Danish Technological Institute to make several new test tube holders and a completely new design for their rotator system, which the test tube holders are inserted into.

You can hear more about Rotapure's solution and the demonstration project in the video below.

About MADE Demonstration projects

With a MADE Demonstration project, a small or medium-sized company can receive up to DKK 100,000 in support to solve a specific challenge in the company or test a new technology in production.

There is an ongoing application deadline for demonstration projects.

The article was originally published by MADE - Manufacturing Academy of Denmark