Corporate Social Responsibility 2011

Andras  Splidt

Your Contact

Contact me

Indtast venligst et validt navn
Or your phone number
Thank you for your message
Vi beklager

På grund af en teknisk fejl kan din henvendelse desværre ikke modtages i øjeblikket. Du er velkommen til at skrive en mail til Send e-mail eller ringe til +45 72 20 20 06.

Corporate Social Responsibility 2011

Statutory report on Corporate Social Responsibility, cf. section 99a of the Danish Financial Statements Act
The Danish Technological Institute has worked with Corporate Social Responsibility (CSR) for a number of years, and below we would like to present our understanding of CSR, our policies and procedures and our accomplishments in 2011. The report is part of management's review in the 2011 annual report and  thus covered by the auditor's opinion.

Ethical guidelines
The ethical guidelines (’Code of Conduct’) of the Danish Technological Institute contain provisions regulating our way of doing business in a responsible manner with respect for human dignity and in compliance with our vision and values. We have a philosophy of acting with full responsibility and commitment on the basis of our fundamental view of respect for all human rights. Our ambition is to foster and encourage principles of responsible business conduct, locally as well as globally. Our code of conduct is integrated into our way of thinking and acting, both internally in the organisation and externally in relation to our customers and stakeholders.

Management’s ambition
As an approved technological service institute, we find it is our duty to contribute to strengthening the dissemination of principles of responsible business conduct, particularly in small and medium-sized enterprises, but also among our other customers and business partners. In so doing, the Danish Technological Institute intends to support and further the principles laid down in the United Nations Universal Declaration of Human Rights.

Our ethical guidelines
The Danish Technological Institute has a set of principles that provide us with ethical guidelines for how to ensure maximum dignity in society through our activities:

1.         We support and respect international human rights

2.         We will ensure that we are not involved in any violation of human rights

3.         We are committed to upholding employees’ freedom of association and
            recognise their collective bargaining rights

4.         Employees must not be punished physically or mentally or subjected to any
            other degrading treatment

5.         We do not accept corruption, including blackmail and bribery

6.         We do not accept forced labour

7.         We do not accept child labour

8.         We do not accept discrimination in the workplace

9.         We give priority to health and safety at work with proper facilities 
            for the employees

10.       Working hours and salaries must comply with national legislation

11.       The Danish Technological Institute aims to recruit the best qualified
            employees regardless of sex, age, race, marital status, language,
            sexual orientation or political conviction

12.       We strive for an open, professional and solution-oriented dialogue in our 
            internal and external communication. At all levels we communicate
            on the basis of our professionalism and desire to safeguard the interests
            of the Danish Technological Institute in the best possible manner

13.       We support preventive measures in relation to the environmental challenges
            we are facing. We take initiatives to improve environmental awareness and
            support the development and dissemination of eco-friendly technologies 
            in compliance with our environmental policy

Fields of application
The Danish Technological Institute strives to ensure proper business conduct by all partners working with the Institute. All purchases through the Danish Technological Institute are made in accordance with the ethical guidelines formulated by the management of the Technological Institute. To do business with the Danish Technological Institute, suppliers need to follow our ethical guidelines and observe all international conventions and national legislation applicable in the country where the work is performed. Moreover, our suppliers must take steps to ensure that their sub-suppliers conduct business in a responsible manner.

The Institute often works in countries where corruption and violation of human rights are far more widespread than in Denmark. The focus is therefore constantly on an effort to maintain a high ethical standard in these countries, as well.

The Danish Technological Institute will not tolerate corruption or bribery. The employees are not allowed to participate in any form of corruption or bribery. Failure to observe this rule will have implications for the employment relationship. To date, the Institute has seen no cases of violation of the policy.  

Checks and evaluations
Our suppliers are responsible for taking relevant and necessary initiatives and measures to ensure that they comply with the ethical guidelines of the Danish Technological Institute. Similarly, it is the suppliers’ responsibility, at our request, to be able to present all relevant information and documentation to the Institute. For example, the suppliers are required at our request to participate actively through dialogue, questionnaires, systematic reporting, visits to suppliers’ premises or any other initiatives the Danish Technological Institute would like to implement for the purpose of checking conditions.

The Danish Technological Institute reserves the right at any time to request an assessment verifying that suppliers comply with our ethical guidelines. If the requirements are not met, the Danish Technological Institute will engage in a constructive dialogue with the supplier concerned to improve conditions. We will demand a plan of action and follow up conditions to ensure improvement.

The Danish Technological Institute is entitled to terminate its cooperation with a supplier if rules are violated or if critical issues are not remedied within a reasonable period of time.

No incidents of non-compliance with the ethical guidelines were reported in 2011.

Environmental policy
The environmental policy of the Danish Technological Institute is characterised by the fact that one of our core competencies is energy and climate. Our competencies in the field of energy and climate encompass all energy sources and energy technologies, ranging from energy generation, storage and distribution to use in buildings, industry and transport. We also work to reduce emissions of human-induced greenhouse gases and to offer solutions to climate change. We have, in particular, accumulated knowledge and facilities that give the Institute a centre-stage position in the following areas:

  • Renewable energy with special expertise in heating pumps, biomass procurement and biomass use as well as solar energy systems. 
  • Natural coolants with international expertise in ammonia, carbon dioxide, hydrocarbons and water. 
  • Energy-technical and industrial measurements with national reference laboratories for energy, flow and temperature. 
  • Energy efficiency with the Energy Test Centre and special expertise in energy-efficient process ventilation. 
  • EnergyFlexHouse with research and development in energy and climate-efficient integrated system solutions and user interfaces in the building and construction sector.

Looking ahead, we intend to build up knowledge and develop specific solutions and services for a broad range of purposes, including management, treatment and new uses of rainwater and climate adaptation of building processes and structures.

Management’s ambition
The overall environmental policy of the Danish Technological Institute is, at all times, to minimise the company’s environmental impact and energy and resource consumption and to integrate environmental considerations into our business processes in accordance with current environmental regulations. As a minimum, we meet the requirements, rules and expectations imposed by the superior authorities in the environmental area, but we will continually endeavour to achieve higher standards than those required by law.

Being an approved technological service institute, we have a special obligation to take the lead in environmental initiatives as managers of the technological development. One of our essential tasks is to support the development and dissemination of eco-friendly technologies and resource-optimising procedures, particularly in small and medium-sized enterprises.

New technology can contribute to alleviating the impact on the climate and the environment if utilised in the right way with respect for nature and man. We see it as an obligation to give the Danish business community an insight into how technologies can support sustainable development, meet market needs and, at the same time, benefit Danish business performance. It is also our task to provide information on the negative effects and risks of technology, for instance if technology is applied incorrectly.

We have an ambition to be a frontrunner in research and development of new technology in the environment and energy areas. As a responsible company, we will continually, systematically and consistently work to develop and use cleaner sustainable technologies, products and processes and be among the most environment-conscious companies in the areas of technology where we operate.

We will continuously endeavour - through information and dialogue on our environmental policy and a persistent focus on environmental responsibility and sustainable technologies in our business processes - to signal and further a high degree of environmental awareness in the wider community.

Open dialogue - demands on suppliers
We maintain an open dialogue with our stakeholders to ensure that we are able, in close cooperation with them, to observe and optimise our environmental policy on an ongoing basis. We demand that our suppliers and sub-suppliers deliver environment-friendly materials, products and services. Another indication of our strong commitment and sense of responsibility is our practice of encouraging customers, business partners and suppliers to adhere to environmental guidelines similar to those adopted by the Danish Technological Institute.

Environmental guidelines
The Danish Technological Institute has developed a series of procedures we follow to protect the environment:

  • Water and energy consumption in the Danish Technological Institute’s buildings is continuously measured, managed and monitored. 
  • We have a sophisticated central energy control and management system, which enables us to follow and change our consumption pattern on a continuing basis.
  • Waste is separated into different elements to ensure correct waste management and disposal in accordance with established procedures and current legislation. Waste sorting is performed to achieve maximum recycling and recovery of waste such as paper, toner cartridges, metal, electronic components, light bulbs, batteries, kitchen waste, etc. Non-hazardous waste that is not recyclable is either collected for incineration or taken to a recognised waste disposal site. 
  • Toxic and/or environmentally hazardous waste is separated at source and disposed of through Kommunekemi in Aarhus or VEGA in the Copenhagen suburb of Taastrup. We follow a specific set of rules for disposal of oil and chemical waste. These rules cover collection, management, packing, packaging, labeling and transportation of waste that poses an environmental or health hazard. 
  • In addition, all printer paper used at the Danish Technological Institute carries the Swan Eco-label. 
  • We are also constantly working to limit consumption of water, paper, office supplies, graphic material and cleaning agents. 
  • We do not use pesticides for weed control. 
  • To minimise the impact of transport on the environment, the employees are encouraged to use phone and video conferencing options as alternatives to travelling.

Environmental initiatives in 2011
While following our general procedures and policies, we took a wide range of initiatives in 2011.

The windows in building 8 in Taastrup have been replaced, which resulted in energy savings.

Two ventilation systems have been renovated, in Danfysik hall 7G and in Energilab, in plastic, which is expected to contribute to savings on both heating and electricity.

The facade of one of the halls in building 8 in Taastrup has been re-insulated and several skylights have been replaced.

New gates and an airlock-like system have been established, which will also contribute to savings on heating.

Twenty percent of all cross-connecting racks are replaced by new ones each year (their power consumption is less than 10% of that of the old ones).

Systems in server room have now been completely virtualised, resulting in a noticeable reduction of power consumption.

Energy consumption 2011

Energy consumption 2011

Terms of employment
Employment at the Danish Technological Institute is regulated within the framework of the employee handbook of the Institute and, for selected groups of employees, within a framework of flexible agreements as well, and the interaction between the Institute and the employees’ union representatives takes place within the Institute’s works council.

Our ethical guidelines apply to all our employees and to the employees of our business partners and suppliers; these guidelines deal with a wide range of issues, including the right of employees to unionise and our ban on forced labour and child labour. Our ethical guidelines are described elsewhere.

The Danish Technological Institute aims to ensure healthy physical and psychosocial working conditions; an HR Policy and a Policy on Health and Safety at Work have been drawn up to support this aim. The policies can be read in their entirety here

Health and safety
We monitor the health and safety of our employees and the psychosocial work climate by means of an employee satisfaction survey conducted anonymously every two years and a workplace assessment survey conducted every three years. The most recent surveys are the Workplace Assessment of 2011 and the Employee Satisfaction Survey of 2010.

The Workplace Assessment of 2011 indicated a very high level of satisfaction with the psychosocial work climate and revealed some areas open to improvement as well. Action plans concerning these matters have been drawn up and implemented. The very few critical concerns indicated by the Workplace Assessment 2011 related to indoor climate. In this area as well, action plans have been drawn up and implemented.

The Employee Satisfaction Survey of 2010 generally indicated that employee satisfaction is extremely high indeed. To the question: ”How satisfied are you generally as an employee of the Danish Technological Institute?", 91% of our employees responded that they were satisfied (88% in 2008). The Employee Satisfaction Survey of 2010 set a new participation record as we achieved a response rate of 92% (88% in 2008).

A new employee satisfaction survey will be conducted in the autumn of 2012.

Sickness absence
One of the key indicators of health and safety at work is sickness absence. In 2011, once again, the Danish Technological Institute was pleased to report a sickness absence rate of 2.1% (2.4% in 2010).

Industrial injuries
For many years, the Danish Technological Institute has experienced a low frequency of industrial injuries. A total of 11 industrial injuries occurred in 2011 (8 in 2010). 

A statement of consumption of electricity, water and heat in 2011 in the largest Danish locations is shown below.