Corrosion - test and advice

Søren Jepsen Mark

Your Contact

Contact me

Indtast venligst et validt navn
Or your phone number
?
Thank you for your message
Vi beklager

På grund af en teknisk fejl kan din henvendelse desværre ikke modtages i øjeblikket. Du er velkommen til at skrive en mail til Send e-mail eller ringe til +45 72 20 18 94.

Rustne tandhjul med kæde

Corrosion - test and advice

Corrosion is seen in all types of industries - from food production to swimming pools. Degradation of metals in the form of corrosion is a huge expense for both society and industry, and every year up to 3-4% of the industrialized countries' GDP is used to remedy the consequences of corrosion-related problems.

Across the industry, materials and coatings are classified according to the corrosion classes C1-C5 and CX, which describe the aggressiveness of the environment in which the metal is to be used. At the Danish Technological Institute, we have extensive experience in identifying and investigating corrosion-related breakdowns on materials and machines. Therefore, we can help your company with assessment, material selection and advice according to the corrosion classes as well as identification of critical factors for your particular product - both before and after the damage has occurred.
See what else we can help you with


Corrosion testing

Before a product is launched on the market, it may be relevant to test the resistance of one or more materials against each other, to test the quality of a corrosion-protective surface, or to test a product against an industry-specific standard. Among other things, we can help your business with:

  • Corrosion testing of welds according to ATSM G48
  • Corrosivity testing of chemicals according to UN Section 37 C.1
  • Benchmarking test of panels, fittings, and coatings with salt spray test according to ISO 9227
  • Adhesion, quality, and layer thickness measurements of corrosion-protective surfaces such as paint or galvanization according to ISO 1463
  • Quality test of anodizing of aluminium according to ISO 3210.

Corrosion in water systems

Corrosion problems in water systems are not an uncommon problem, and we are happy to help with damage analyses or regarding corrosion problems in your water-carrying components. We can help locate the cause of corrosion as well as ensure the quality of components before installation. Among our tests and analyses for water systems are e.g.

  • Chemical analysis of corrosion products found in water systems with SEM / EDS.
  • Chemical analysis of alloy composition on steel, stainless steel and brass components according to ASTM E415-17, ASTM E1086-14 and DS / EN 15079
  • Dezincification resistance and stress corrosion test of brass components according to ISO 6509 and ISO 6957.

Corrosion in construction and renovation

Construction and renovation projects often require protection of the construction steel, and galvanization or painting are the most commonly used methods. Building materials often have to live up to one of the six corrosion classes; C1, C2, C3, C4, C5 or CX, and therefore an understanding of the environment, construction, materials and protection are important to ensure the agreed life of your construction project. We can help you choose the right form of protection for your construction as well as ensure the quality of your coatings.

Residual life and corrosion protection

If it is time to renovate a component, or if your construction has been subjected to a corrosion attack, an important piece in the planning can be a condition assessment of surfaces and materials. With our measuring equipment and experience with corrosion types in buildings, we can offer an independent assessment of your construction, an estimated residual life, and sparring about a possible recovery strategy. We also have extensive experience with anti-corrosion surface coatings, and we can help examine the market for solutions that can prevent corrosion under different operating conditions.

Corrosion in production lines

Regardless of whether you and your company produce food, medicine or consumables, corrosion can occur on the production equipment. The corrosion is often caused by chemicals in the production from e.g. cleaning, but corrosive foreign bodies may also have entered the production line – and they must be identified. Whether you want to investigate the cause of existing corrosion or want to anticipate the corrosion, we are ready to help with troubleshooting, material selection and advice, so you achieve the right specifications for your needs.

How can the Danish Technological Institute help you?

  • Investigation of corrosion damage
  • Advice on corrosion protection and material selection
  • Standardized corrosion tests.