Accredited Heat Pump Testing According to Applicable EU Legislation and Standards
Tests in our Heat Pump Test Laboratory are always performed in strict accordance with applicable European regulations and harmonised standards. For every completed test campaign, an independent, accredited test report is issued covering the exact regulatory and normative requirements.
An accredited heat pump test provides formal, third-party verification that your heating and cooling equipment has been evaluated in full compliance with recognised international standards and European statutory frameworks. Accreditation is your quality assurance: it guarantees that performance data, energy metrics, and acoustic measurements are technically sound, repeatable, and legally defensible before notified bodies, market authorities, and European subsidy administrators.
Accredited Excellence
Our Heat Pump Test Laboratory is accredited according to EN/ISO 17025:2017.
We are accredited by DANAK - the national accreditation body in Denmark, appointed by The Danish Safety Technology Authority under the Ministry of Industry, Business and Financial Affairs.
Through DANAK, our accreditation operates under the EA (European co-operation for Accreditation) Multilateral Agreement and ILAC (International Laboratory Accreditation Cooperation) mutual recognition agreements. This means test reports issued by Danish Technological Institute are mutually accepted across all EU/EEA member states, the UK, and international markets without supplementary domestic testing.
EN/ISO 17025:2017 Accredited Laboratory
DANAK Accreditation No. [Registration ID]
Fully recognised under ILAC and EA Multilateral Agreements
Aligning Heat Pump Testing with European Directives and Harmonised Standards
European market access demands rigorous alignment with evolving energy and environmental mandates. We conduct accredited testing that directly feeds into your technical documentation, CE marking declarations, and EU Energy Labels.
Ecodesign and Energy Labelling Regulations
We document seasonal efficiency and environmental parameters in accordance with relevant European Commission delegated regulations:
- Space heaters and combination heaters: Testing under Regulation (EU) No 813/2013 and Energy Labelling Regulation (EU) No 811/2013.
- Domestic hot water (DHW) heat pumps: Testing according to Regulation (EU) No 814/2013 and Energy Labelling Regulation (EU) No 812/2013.
- Air-to-air and reversible air conditioners: Testing under Regulation (EU) No 206/2012 and Regulation (EU) No 626/2011.
- Calculation of Seasonal Performance: Determination of SCOP, SEER, and Seasonal Space Heating Energy Efficiency (ηs).
Core European Test Standards
Our testing protocols strictly follow the latest revisions of harmonised European standards:
- EN 14511: Requirements, test conditions, and test methods for the rating and performance of air-to-water, water-to-water, and brine-to-water heat pumps for space heating and cooling.
- EN 14825: Testing and rating at part load conditions and calculation of seasonal performance (SCOP, SEER).
- EN 16147: Testing, performance rating, and requirements for marking of domestic hot water heat pump units.
- EN 12102-1: Determination of the sound power level across varying operating temperatures and humidity profiles.
A Reliable Basis for European Certification Schemes
In addition to baseline legislative compliance, accredited data from our laboratory forms the direct foundation for market-leading certification marks and subsidy programmes:
- CEN Heat Pump KEYMARK: Fully accredited testing recognised for the pan-European KEYMARK scheme.
- EHPA Quality Label: Compliance documentation meeting the European Heat Pump Association criteria.
- MCS (Microgeneration Certification Scheme): Accredited test reports supporting entry into the UK domestic and non-domestic markets.
- NTA 8800: Performance documentation tailored to Dutch building energy regulations.
Whether you are seeking documentation for specific heat pump types, detailed facility data, or European certification pathways, the following resources provide deeper insights into our testing scope and laboratory capabilities:
Related Information and Next Steps
Transparent, Specialist-Led Compliance Process
Navigating European legislation does not have to be a bureaucratic obstacle. We provide a structured, engineer-to-engineer compliance path:
We identify the exact European standards and Ecodesign lots applicable to your product type and target markets. Equipment is mounted in dedicated climate and acoustic chambers under controlled environmental parameters. Automated data logging and strict adherence to standard test profiles (e.g. standard rating conditions, bivalent points, and defrost cycles). Real-time visibility of raw data. Should anomalies arise, our specialists engage directly with your engineers. Issuance of an official EN/ISO 17025 accredited test report, ready for submission to certification bodies, market surveillance authorities, and notified bodies.1. Regulatory Scope & Standard Mapping
2. Setup & Pre-Test Calibration
3. Accredited Test Execution
4. Transparent Data Review
5. Accredited Reporting
Why Choose Danish Technological Institute for Accredited Testing?
- Regulatory Certainty: Ensure your declarations of conformity and product fiches are built on bulletproof third-party data.
- More than 30 Years of Specialisation: Deep technical knowledge of heat pump thermodynamics, acoustics, and regulatory transitions (including F-gas and flammable refrigerants).
- Direct Specialist Communication: Discuss technical criteria directly with the testing engineer handling your unit.
- Pan-European Acceptance: Eliminate redundant testing through full international accreditation recognition via DANAK and ILAC.
Discuss Your Compliance and Accreditation Needs
Use the enquiry form to the right to reach Business Manager Preben Eskerod to discuss your specific compliance requirements, clarify applicable standard, define your test scope, and secure your laboratory schedule.
To learn more about the specialists managing and executing your tests, you can view our complete team below.
ER DET DEN RIGTIGE TILMELDINGSFORMULAR?